MODERN TECHNOLOGIES FOR AGRICULTURE

+7 (4712) 76-00-32

SILO

FLAT BOTTOM SILO

FLAT BOTTOM SILO

The flat bottom silos are used for a long storage of any types of the grain. The silo has a cylindrical form of the walls and a conic roof made from the metal . It’s mounted on the concrete foundation. The concrete bottom is flat and has the ventilation channels.

The standard list of equipment includes: the walls and the roof from the steel with the stiffeners, joint bolts, isolating mastic, the doors on the roof and on the second walls ring, outer stairs with the rest platforms, inner stairs, the stairs with the rails on the roof, the clean-up auger, ventilation system, the temperature control system with the viewing program, the sensor of upper and lower grain level.



HOPPER BOTTOM SILO OF A LARGE VOLUME

HOPPER BOTTOM SILO  OF A LARGE VOLUME

The silo with a conic bottom is used for the temporary storage of different types of the grain. Such type of the silo is used in feed mill industry, elevator complexes, grain mills.

The silo has a cylindrical form of the walls, conic roof and floor from the metal. A special construction provides easy unloading. It’s not necessary to use a lot of concrete for the foundation. The lower conic part is manufactured with different angles of slope, depending on purpose.

The standard list of equipment includes: the walls and the roof from the steel, the stiffeners, joint bolts, isolating mastic, the doors on the roof and on the wall, supported columns with X-shores, outer stairs with the rest platforms, inner stairs, the stairs with the rails on the roof, ventilation system, the temperature control system with the viewing program, the sensor of upper and lower grain level.



HOPPER BOTTOM SILO OF A LOW VOLUME

HOPPER BOTTOM SILO OF A LOW VOLUME

Such types of silos are ideal for low capacity grain storage requirements. They are used in feed mill industry, elevator complexes as a hopper for days-on-hand before and after the grain dryer, grain mills, farms  

The silo has a cylindrical form of the walls, conic roof and floor from the metal. A special construction provides easy unloading. It’s not necessary to use a lot of concrete for the foundation. The lower conic part is manufactured with different angles of slope, depending on purpose.

The standard list of equipment includes: the walls and the roof from the steel, the stiffeners, joint bolts, isolating mastic, the doors on the roof and on the wall, supported columns with X-shores, outer stairs, inner stairs, the stairs with the rails on the roof, ventilation system, the temperature control system with the viewing program, the sensor of upper and lower grain level.